HRT DVS-2A, Руководство пользователя

Страница: 14 / 20

2-Port DVI Switch with Audio & Serial Control
12
ASCII ‘P’ or ‘p’ (Hex 50/70 or Decimal 80/112)
Selects Input #1 priority.
The device will respond with: PC 1 priority selected
If ‘Input #1’ priority is selected, the unit will select input #1
automatically whenever the presence of the video at the
‘Input 1’ DVI connector is detected even if the output from
‘Input 2’ is currently playing.
ASCII ‘N’ or ‘n’ (Hex 4E/6E or Decimal 78/110)
Selects no priority for Input #1.
The device will respond with: No priority selected
ASCII ‘B’ or ‘b’ (Hex 42/62 or Decimal 66/98)
Blanks the output.
The device will respond with: Blank mode selected
When the output is blanked, only the color intensities of the
output are reduced to zero. The unit still operates in a normal
fashion and sync signals are still routed to the output. The
audio output is muted.
ASCII ‘U’ or ‘u’ (Hex 55/75 or Decimal 85/117)
Un-blanks the output.
The device will respond with: Unblank mode selected
ASCII ‘E’ or ‘e’ (Hex 45/65 or Decimal 69/101)
Causes the output signal equalization for long cabling to be
enabled.
The device will respond with: Boost enabled
ASCII ‘D’ or‘d’ (Hex 44/64 or Decimal 68/100)
Causes the output signal equalization for long cabling to be
disabled.
The device will respond with: Boost disabled