HQUA PAS20, Инструкция по эксплуатации

Страница: 4 / 15

Safety Information
4
Section 1 Safety Information
Before starting the installation job, it’s very important to read the entire instructions below.
Make sure that you understand these in order to avoid potential hazards. Failure to do so
may result in serious personal injury or damage to the equipment.
Electric Shock
• To reduce the risk of electric shock, connect only to a properly grounded, grounding-type
receptacle. If in doubt, have the outlet checked by a qualified electrician.
• This unit is to be used in a circuit protected by a ground fault circuit interrupter (GFCI).
• Disconnect unit from power source before handling or maintenance.
• Do not attempt operate any electric part of this unit. Connect the power supply should be
the only installation step that involved the electricity.
Safety Precautions
• Keep the compressor ventilated, cool and dry.
• Do not allow anything to rest on the power cord.
• Never attempt any maintenance function that is not specified in the user manual.
• Never operate the system if unusual noises or odors are detected. Disconnect the power
cord from the outlet and call for service
This product must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the electric
current. This product is equipped with a cord having a grounding wire with an appropriate
grounding plug. The plug must be plugged into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances
Improper installation of the grounding plug is able to result in a risk of electric
shock. When repair or replacement of the cord or plug is required, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer
surface that is green is the grounding wire.