LEDA03C
11/12/2009
©Velleman nv
7
e) slave mode
•
In slave mode, the
LEDA03C
will respond according to the control signals it receives on the
DMX input
[E]
and forwards these signals on its output
[F]
. This way multiple devices can run
synchronously.
•
Press the
menu
button and press the
up
- or
down
button until the display
[C]
shows
.
Note
: the first
LEDA03C
in the DMX-chain can not be set to slave. It can run an internal program
or can be connected to an external DMX controller (not incl.). The last
LEDA03C
in the chain
must have a terminator installed to avoid DMX signal corruption.
f) manual mode
•
In manual mode, you can set the red, green and blue LED outputs individually, thus creating
your own output colour.
•
Press the
menu
button and press the
up
- or
down
button until the display
[C]
shows
.
•
Press the
enter
button and use the
up
- or
down
button to select a LED. Press the
up
- or
down
button to set the intensity (0 = off, 255 = full brightness):
red
green
blue
8.
Technical specifications
power supply
230VAC ~ 50Hz
power consumption
max. 36W
data output
RJ45
dimensions
125 x 70 x 194mm
weight 1.65kg
ambient temperature
max. 45°C
Use this device with original accessories only. Velleman nv cannot be held responsible
in the event of damage or injury resulted from (incorrect) use of this device. For more
info concerning this product, please visit our website www.hqpower.eu. The information
in this manual is subject to change without prior notice.
©
COPYRIGHT NOTICE
This manual is copyrighted.
The copyright to this manual is owned by Velleman nv.
All
worldwide rights reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written consent of the copyright
holder.
