HQ Power LEDA03C, Руководство пользователя

Страница: 6 / 29

LEDA03C
11/12/2009 ©Velleman nv
6
• When selecting , or , press the enter button again and use the up - or
down button to set the changing speed:
30s 20s 10s 7s 5s 4s 3s 2s 1s 0.5s
c) sound mode
• In this mode, colour step changing is activated by the beat of the music.
• Press the menu button and press the up - or down button until the display [C] shows .
• Press the enter button and use the up - or down button to set the sound sensitivity:
: very high sensitivity : very low sensitivity
d) DMX mode
• In DMX mode, the system can be controlled via 6 channels.
• All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to “listen”
to the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
• When all devices have the same address, all the units will “listen” to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
• In case of the 6-channel LEDA03C , you will have to set the start address of the first unit to
001, the second unit to 007 (1 + 6), the third to 013 (7 + 6), and so on.
• Press the menu button and press the up - or down button until the display [C] shows .
• Press the enter button and use the up - or down button to set the DMX address:
CH1 0 – 150: colour mixing 151 – 230: colour macros
and auto programs 231 – 255: sound activation
CH2 red: 0-100% select 18 colours or 2
programs
-
CH3 green: 0-100% speed: slow to fast -
CH4 blue: 0-100% - -
CH5 strobe:
0-20: no function
21-255: slow to fast
strobe:
0-20: no function
21-255: slow to fast -
CH6 dimming:
0: intensity 100%
255: intensity 0%
dimming:
0: intensity 100%
255: intensity 0% -
• When the value of channel 1 is between 151 and 230, the function of channel 2 is given below:
1 ~ 12 red 92 ~103 orange 182 ~ 195 chocolate
13 ~ 25 green 104 ~ 116 purple 195 ~ 207 light blue
26 ~ 38 blue 117 ~ 129 yellow/green 208 ~ 220 violet
39 ~ 51 yellow 130 ~ 142 pink 221 ~ 233 gold
52 ~ 64 magenta 143 ~ 155 sky blue 234 ~ 246 step change
65 ~77 cyan 156 ~ 168 orange/red 247 ~ 255 cross fade
78 ~ 91 white 169 ~ 181 pale green
• When the value of channel 1 is between 231 and 255, the system is running in sound mode. Set
the sound sensitivity level according to desired effect and ambient noise levels