9
OPERATE
1. Turn on the switch after
the machine
2- Unzip the installation package and double-click
Install.exe to start the installation.
Follow the instructions. In most cases, you only need to
accept the default on the following screens.
Select Install, Next
OEM Combo384 Module
• No drivers needed for these operating systems. • See
restrictions in specification.
CAREFUL:
- Turn off the power for all devices before making a connection.
- Read the instructions of each component you plan to use with this device.
- Be sure to plug each plug securely. To prevent noise and noise, avoid the cable bundle that connects the signal with the
AC power cord or speaker cable.
2. Press the front SWITCH button or
press PWR button on the control
3. DAC starts after 1 minute
Information display screen
1. Turn on the power switch behind the DAC - Figure 1
2. Press the SELECT / SWITCH button on the DAC (or PWR button on the control) - Figure 2
DAC boots with standby mode 60s, the display is full of information - Figure 3
3. Turn on the amplifier and play music through DAC to enjoy the music.
INSTALL THE AMANERO USB DRIVER
A. Install on Windows computer
http://www.amanero.com/drivers.htm
1-Download the latest driver from Amanero's website
Run and install Combo384-ASIO32-select Next
B. Install on Mac / Linux computers
The computer has been installed with USB driver
and ready to use.
C. Install on Pi3 server-located in DAC
C. Install on Pi3 server-located in DAC
Figure 1
Figure 2
Figure 3
SELECT
/
SWITCH
SET
PWR
CH+
CH-
MUTE
DSP
V+
V-
