AUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
D O N O T R E M O V E C O V E R ( O R B A C K ) . N O
USERSERVICEABLE PARTS INSIDE. REFER ERVICING
TO QUALIFIED SERVICE PERSONNEL
Contents
Thank you for choosing Quang Hao Dac.
Read this guide carefully to get the best performance
from this product.
1) Read these instructions.
2) Keep these instructions.
3) Notice all warnings.
4) Follow all instructions.
5) Do not use this device near water.
6) Only clean with a dry cloth.
7) Do not block any ventilation openings. Install according to the
manufacturer's instructions.
8) Do not install near any heat sources such as radiators,
heating rods, stoves or other equipment (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarizing or
grounding plug. A polarized plug has two blades with one larger
than the other. The grounding plug has two blades and a third
serial bar. Wide blades or third prongs are provided for your
safety. If the supplied plug does not fit your socket, consult an
electrician to replace the old socket.
10) Protect the power cord from being stepped on or pinched
especially at the plug, power outlet and exit point of the device.
11) Use only the attachments / accessories specified by the
manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
12) Use only with the cart, bracket, tripod,
bracket or table specified by the
manufacturer or sold with the device. When
using a shopping cart, use caution when
moving the cart / device combination to avoid
injury from the beginning.
13) Unplug this device during lightning storms or when not in
use for a long time.
14) Refer to all services for qualified service personnel. Service
is required when the device is damaged in any way, such as a
damaged power cord or plug, liquid has been spilled or objects
have fallen into the device, the device has been exposed to rain
or moisture , does not work normally or has been removed.
Some note:
• This device is designed for systems with input
power: 220-230V AC.
• Before installing this device, make sure your
electrical outlet is safe enough, the devices in the
system do not have electrical leakage, maybe the
device will be damaged.
• Do not place the device in or near places where the
temperature and humidity are too high, as this may
cause damage to the system.
• When the power supply cord is broken, fire, break ...
must ensure the correct type of wire with the current
strength.
• Should turn on the device before turning on the pre-
amp system, amply, the system needs a certain time to
boot and ready to use - about 2 minutes.
• Do not place credit cards, lighters, or objects that are
DAC-Connect and install. . . .. . . . . . . . . . . . . . . . . . . . . . . .3
General introductio. . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . .4
Front - Back and features. . . . . . . . . .. . . . . . .. . . . . . . . . . 5
. . . . . . .. . . .
.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7
. .
. . 8
. . . . .
9
. . .
. . . . . . . . . . . . . . . . .10
Remote Control-and Install The Features
Special Features.
Installing Features By Remote Control
Operate
Music Player Setup
Music Player Setup
. . . .
. .. . . . . .. .
. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HQ Music Server-Server playing music. . . . . . . . . . . . . .. 12
Music server connect. . . . . . . . . . . . . . . . . . . . . . .. . . . . . 13
Volumio Guide. . . .. . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .14
Volumio Guide. . . .. . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .15
Volumio Guide. . . .. . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .16
Volumio Guide. . . .. . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .17
Volumio Guide. . . .. . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .18
Playback music files. . . . . . . . . . . . . . . . . . .. . . . . . . . . . 19
Technical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PART II-MUSIC SERVER
Part I: DAC and advanced features
2