HPRT PPTII-A, Руководство по программированию

Страница: 15 / 52

PPTII-A Programming Manual
www.hprt.com 15
[Notes] 3) When underline mode is off, there is no underline for following characters. Underline
width stays the same, default width: one dot width.
4) Character size change has no effects on underline width.
5) Turn underline mode on / off can be set by ESC !, the command executed at last is
effective.
[Default] n = 0
ESC 2
[Name] Set character line spacing for 30
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Dscription] Selects 3.875 mm (31* 0.125 mm) line spacing.
[Notes] The line spacing can be set independently in standard mode and in page mode.
ESC 3 n
[Name] Set character line spacing
[Format] ASCII ESC 3 n
Hex 18 33 n
Decimal 27 51 n
[Range] 0 ≤ n ≤ 255
[Dscription] Sets the line spacing to [n*0.125 mm].
[Notes] The line spacing can be set independently in standard mode and in page mode.
[Default] n =31.
ESC = n
[Name] Select peripheral device
[Format] ASCII ESC = n
Hex 1B 3D n
Decimal 27 61 n
[Range] 0≤n≤1
[Dscription] selects the device to which the host computer sends data, based on the value of n as
follows:
Bit 1/0 Hex Decimal Function
0 0 00 0 Printer disabled.
1 01 1 Printer enabled
1-7 Undefined.
[Notes] • When the printer is disabled, it ignores all received data with the exception of DLE
EOT
、
DLE ENQ and ESC
＝
.
[Default] n=1