NOTE:
With firmware versions 720H and later, the
Advanced
button shown in this illustration is
labeled
Driver
.
7.
Click
OK
.
Configuring the library after enabling control path failure
Library configuration requirements when using Secure Manager
Use the Secure Manager Configuration Wizard to map hosts that have been granted access to FC drive
ports.
Procedure
1.
For basic control path failover, map hosts that have been granted access to the control path device to
the first FC drive port.
2.
For advanced control path failover, map hosts that have been granted access to the control path
device to both FC ports.
28
Configuring the library after enabling control path failure
