HPE ProLiant XL740f Gen9, Руководство пользователя и по обслуживанию

Страница: 45 / 74

Removal and replacement procedures 45
3.
Remove the server (on page 11 ).
4.
Remove the access panel (on page 12 ).
5.
Remove the accelerators (" Accelerator " on page 44 ).
6.
Remove the accelerator riser board:
a.
Disconnect the nine screws securing the accelerator riser board to the tray.
b.
To disconnect the riser board, slide the riser out from the system board, and then lift up to remove
it.
To replace the component, reverse the removal procedure.
Memory options
The memory subsystem in this server can support the following regular RDIMMs with the Intel Xeon
E5-2600 v3 processors:
o
HPE 8 GB (1x8 GB) Single Rank x4 DDR4-2133
o
HPE 16 GB (1x16 GB) Dual Rank x4 DDR4-2133
The server supports single- and dual-rank PC4-2133 (DDR4-2133) RDIMMs with speeds operating at up
to 2133 MT/s.
Speed and capacity
DIMM rank DIMM capacity (GB) Native speed (MT/s)
Single
8 2133
Dual
16 2133
Depending on the processor model, and the number of DIMMs installed, the memory clock speed can be
reduced to 1600 MT/s.
Populated DIMM speed (MT/s)
Processor type DIMM rank 1 DIMM per channel 2 DIMMs per channel
Intel Xeon E5-2600 v3
Single (8 GB) 2133 2133
Intel Xeon E5-2600 v3
Dual (16 GB) 2133 2133