HPE ProLiant XL740f Gen9, Руководство пользователя и по обслуживанию

Страница: 44 / 74

Removal and replacement procedures 44
6.
Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Accelerator
To remove the component:
1.
Power down the server (on page 10 ).
2.
Disconnect all peripheral cables and power cords from the rear panel.
3.
Remove the server (on page 11 ).
4.
Remove the access panel (on page 12 ).
CAUTION: To avoid damage to the accelerator, do not touch the edge where the accelerator
aligns with the water wall.
5.
Remove the Intel Xeon Phi 7120D coprocessor accelerator.
To replace the component, reverse the removal procedure.
Accelerator riser board
1.
Power down the server (on page 10 ).
2.
Disconnect all peripheral cables from the server.