Operations 11
1.
Open the server blank locking lever.
2.
Remove the server blank.
Remove the server
CAUTION:
To avoid damage to the server, always support the bottom of the server when
removing it from the rack.
CAUTION:
To avoid damage to the server faceplate, remove the server by pulling forward
with the release handle.
CAUTION:
Always install a server or server blank in each slot in the rack. Failure to do so
results in improper airflow that can lead to a decrease in thermal performance.
To remove the component:
1.
Power down the server (on page
Содержание ProLiant XL740f Gen9
Страница 8: ...Component identification 8 Server numbering in rack Serial label pull tab...
Страница 50: ...Removal and replacement procedures 50 5 Remove the DIMM cover 6 Using the DIMM tool remove the DIMM...
Страница 67: ...Support and other resources 67...
Страница 68: ...Support and other resources 68...