13
Model
Router dimensions
Requirements for the rack
{
45 mm (1.77 in) for connecting an
Ethernet network cable
{
60 mm (2.36 in) for connecting an E1
cable
rear door
—A minimum of 460 mm
(18.11 in)
Mounting the router in a rack
WARNING!
The mounting brackets can only support the weight of the router. To avoid damage to the router, do
not place any objects on the router.
To mount the router in a rack:
1.
Use a mounting bracket to mark the positions of cage nuts on the front rack posts, making sure
they are at the same level.
Figure 8 Marking the positions of cage nuts
2.
Insert one edge of a cage nut into the hole. Use a flat-blade screwdriver to compress the other
edge of the cage nut, and then push the cage nut fully into the hole.
