31
Figure 34 Installing a filler panel
Replacing a DSIC
1.
Completely loosen the captive screws of the DSIC.
2.
Gently pull the DSIC out along the slide rails.
If you need to install a DSIC or SICs, see "Installing the router" for the installation procedure.
To install filler panels, proceed to steps 3 and 4.
3.
Gently push the slot divider into the DSIC slot along the slide rails and tighten the screws.
4.
Install the filler panels and tighten the screws.
Figure 35 Removing a DSIC
Figure 36 Installing the slot divider
