HPE FlexFabric 5940 SERIES Скачать руководство пользователя страница 80

Страница: 80 / 88

Management Ethernet port LEDs

The HPE 5940 , HPE 5940 48XGT 6QSFP+, HPE 5940 48SFP+ 6QSFP+, and HPE
FlexFabric 5940 4-slot switches each provide one LINK LED and one ACT LED for the management
Ethernet port.

Table 37 Description for the management Ethernet port LED

LED mark

Status

Description

LINK

Off

The management Ethernet port is not connected.

Steady green

The management Ethernet port is operating at 10/100/1000 Mbps.

ACT

Off

The management Ethernet port is not receiving or sending data.

Flashing yellow

The management Ethernet port is sending or receiving data.

The HPE 5940 48SFP+ 6QSFP28, HPE 5940 48XGT 6QSFP28, and HPE 5940 2-slot switches
provide a LINK/ACT LED for each management Ethernet port.

Table 38 Description for the copper management Ethernet port LED

LED mark

Status

Description

LINK/ACT

Steady green

The copper management Ethernet port is operating at 10/100/1000
Mbps and a link is present.

Flashing green

The copper management Ethernet port is receiving or sending data.

Off

The copper management Ethernet port is not connected.

Table 39 Description for the fiber management Ethernet port LED

LED mark

Status

Description

LINK/ACT

Off

The fiber management Ethernet port is not connected.

Steady green

The fiber management Ethernet port is operating at 1000 Mbps.

Flashing green

The fiber management Ethernet port is receiving or sending data at
1000 Mbps.

Steady yellow

The fiber management Ethernet port is operating at 100 Mbps.

Flashing yellow

The fiber management Ethernet port is receiving or sending data at
100 Mbps.

1/10GBASE-T autosensing Ethernet port LEDs

Table 40 1/10GBASE-T autosensing Ethernet port LED description

Status Description

Steady green

The port has a link and is operating at 10 Gbps.

Flashing green

The port is sending or receiving data at 10 Gbps.

Steady yellow

The port has a link and is operating at 1 Gbps.

Flashing yellow

The port is sending or receiving data at 1 Gbps.

Off

No link is present on the port.

Содержание FlexFabric 5940 SERIES

























































































Результаты поиска

Содержание FlexFabric 5940 SERIES

Отзывы:

Похожие инструкции для FlexFabric 5940 SERIES

Бренды по названию

Популярные бренды

HPE FlexFabric 5940 SERIES, Руководство по установке

Результаты поиска

Содержание FlexFabric 5940 SERIES

Отзывы:

Похожие инструкции для FlexFabric 5940 SERIES

Бренды по названию

Популярные бренды