HPE FlexFabric 5940 SERIES Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 88

background image

24

Select appropriate fan trays as needed. For the optional fan trays and their specifications, see "

."

Installing an LSWM1FANSC/LSWM1FANSCB/LSWM1HFANSC/LSWM1HFANSCB fan tray

1.

Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.

2.

Unpack the fan tray and verify that the fan tray model is correct.

3.

Grasp the handle of the fan tray with one hand and support the fan tray bottom with the other,
and slide the fan tray along the guide rails into the slot until the fan tray seats in the slot and has
a firm contact with the backplane (see callout 1 in

4.

Fasten the captive screw on the fan tray with a Philips screwdriver until the fan tray is securely
attached in the chassis (see callout 2 in

).

If the captive screw cannot be tightly fastened, verify the installation of the fan tray.

Figure 28 Installing an LSWM1HFANSC fan tray for an HPE 5940 switch

Installing an LSWM1BFANSC/LSWM1BFANSCB fan tray

1.

Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.

2.

Unpack the fan tray and verify that the fan tray model is correct.

3.

Orient the fan tray with the "TOP" mark on the top. Grasp the handle of the fan tray with one
hand and support the fan tray bottom with the other, and slide the fan tray along the guide rails
into the slot until the fan tray is fully seated in the slot and has a firm contact with the backplane.

Figure 29 Installing an LSWM1BFANSC/LSWM1BFANSCB fan tray

1

2

«
...
26
27
28
29
30
...
»

Содержание FlexFabric 5940 SERIES

























































































Отзывы:

Нет отзывов

Похожие инструкции для FlexFabric 5940 SERIES

SkyEdge II-c Capricorn Pro 4 AC Series

Бренд: Gilat Страницы: 2

Бренд: socomec Страницы: 43

Бренд: Edge-Core Страницы: 12

Бренд: Endress+Hauser Страницы: 25

Бренд: Accton Technology Страницы: 547

24-Port Gigabit Switch

Бренд: Belkin Страницы: 2

LMX-1002G-SFP Series

Бренд: ANTAIRA Страницы: 22

Бренд: Gomax Страницы: 24

velatia cgm.3 system

Бренд: Ormazabal Страницы: 76

S3100-16T P-EI-W

Бренд: H3C Страницы: 60

Бренд: Kathrein Страницы: 41

Бренд: Intellinet Страницы: 12

Sun Datacenter InfiniBand Switch 36

Бренд: Sun Oracle Страницы: 12

Бренд: DVIGear Страницы: 11

8 Port 10/100 Ethernet Switch

Бренд: OnQ Technologies Страницы: 14

Бренд: Copal Страницы: 9

Бренд: Intellinet Страницы: 12

Бренд: MicroNet Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды