53
Syntax
dldp authentication-password
{
cipher
cipher
|
simple
simple
}
undo dldp authentication-password
Default
No DLDP authentication password is configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
cipher
cipher
: Sets a ciphertext password. The
cipher
argument is a case-sensitive string of 1 to 53
characters.
simple
simple
: Sets a plaintext password. The
simple
argument is a case-sensitive string of 1 to 16
characters.
Usage guidelines
For security purposes, all DLDP authentication passwords, including passwords configured in plain
text, are saved in cipher text.
To enable DLDP to operate correctly, make sure the DLDP authentication modes and the passwords
configured on the two ends of a link are the same.
If you do not configure the authentication password after you configure the authentication mode, the
authentication mode is
none
no matter which authentication mode you configure.
Examples
# Configure to perform plain text authentication and set the password to
abc
(assuming that Device
A and Device B are connected by a DLDP link).
•
Configure Device A:
<DeviceA> system-view
[DeviceA] dldp authentication-mode simple
[DeviceA] dldp authentication-password simple abc
•
Configure Device B:
<DeviceB> system-view
[DeviceB] dldp authentication-mode simple
[DeviceB] dldp authentication-password simple abc
Related commands
•
display
dldp
•
dldp
authentication-mode
dldp delaydown-timer
Use
dldp delaydown-timer
to set the DelayDown timer.
Use
undo dldp delaydown-timer
to restore the default.
Syntax
dldp delaydown-timer
time
