35
Configurations in Ethernet interface view take effect only on the current interface; configurations in
aggregate interface view take effect on the aggregate interface and all its member ports;
configurations on a member port take effect only when the member port leaves the aggregation
group.
Examples
# Configure a MEP list in service instance 5, and create and enable inward-facing MEP 3 in service
instance 5 on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100
[Sysname] cfd meplist 3 service-instance 5
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] cfd mep 3 service-instance 5 outbound
Related commands
cfd meplist
cfd meplist
Use
cfd meplist
to create a MEP list, a collection of local MEPs allowed to be configured and the
remote MEPs to be monitored in the same MA.
Use
undo cfd meplist
to delete existing MEP lists.
Syntax
cfd meplist
mep-list
service-instance
instance-id
undo cfd meplist
mep-list
service-instance
instance-id
Default
No MEP list is created.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
meplist
mep-list
: Specifies a list of MEP IDs, indicating multiple MEPs, in the format of
mep-list
=
{
mep-id
[
to
mep-id
] }&<1-10>, in which
mep-id
represents the MEP ID and is in the range of 1 to
8191.
&<1-10>
indicates you can specify up to 10 MEP ID ranges.
service-instance
instance-id
: Specifies the service instance ID in the range of 1 to 32767.
Usage guidelines
Before creating a MEP list, create the relevant MD, MA, and service instance.
After you delete a MEP list, all local MEP configurations based on this list are deleted.
Examples
# Create a MEP list that includes MEP 9 through MEP 15 in service instance 5.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100
