Installing a type -a controller
Prerequisites
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• T-15 Torx screwdriver
Procedure
1.
Observe the following alerts:
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
2.
Back up all server data.
3.
on page 20).
4.
Disconnect all peripheral cables from the server.
5.
Remove the system board module from the chassis (
Removing the system board module from the
on page 22).
6.
Place the module on a flat, level work surface.
7.
Install the controller.
8.
Connect the controller cables.
9.
Install the system board module.
Installing a type -a controller
51
Содержание Apollo 6500 Gen10
Страница 25: ...To replace the component reverse the removal procedure Operations 25...
Страница 71: ...Cabling 71...
