HPC Tiger SHARK, Руководство пользователя

Страница: 62 / 65

60
9.
Warranty, Maintenance, Cleaning, and Repair
Warranty
The Tiger SHARK
™
machine is fully warranted for 2 years from the date of purchase, against factory
defects in material and workmanship. Please complete and return the Registration Card and a copy of
your invoice to validate your warranty. During the 2 year warranty period, you will be billed for shipping
and handling only.
Maintenance
There is no regular maintenance required. The motor and cutter head are equipped with sealed bearings
that require no lubrication. All bearings and sliding surfaces have been lubricated during assembly.
In the event the jaws do not easily separate when the wing nut is loosened, they may require lubrication.
Remove the wing nut, washer set, top jaw, and spring. Clean the bottom jaw, stud, and top jaw with a soft
cloth. Place a small amount (pea-size) of Super Lube
®
or similar synthetic grease lubricant in the inside
cavity of the top jaw and spread it evenly around the cavity. Take care to not put lubricant on the key
clamping surfaces. Replace the spring, top jaw, washer set and wing nut.
Factory Repairs
The HPC Key Machine Service Department is available to offer prompt service on your machine and to
order replacement parts.
The hours of operation are 8:00am - 3:30pm - Monday - Friday.
In the event you need to return your machine for service please contact the service department to obtain a
repair order number prior to shipping the machine.
It is imperative the Tiger SHARK
™
be packed in the original carton as originally packed. HPC assumes no
liability for damage to machines that are not properly packed.
Payment for non-warranty repairs can be made by check in advance of repair work, Visa or Mastercard, or
billed through an authorized HPC Distributor.
It is important to keep the machine clean. Remove all brass chips and dirt from the cutting area with a
soft bristle brush. Do not use compressed air to blow the brass chips away, as this may force the chips
inside the machine. It is best to use a vacuum to clean the machine and area.The Touch Screen should
be cleaned with a commercial glass cleaner sprayed on a soft cloth. Do not spray the screen directly.
Cleaning