HPC Tiger SHARK, Руководство пользователя

Страница: 18 / 65

3.1 Loading Key Blanks
The Tiger SHARK
™
is equipped with 4-way jaws and integral shoulder and tip gauges. The choice of using the
shoulder or tip gauge is mandated by the type of key being cut. If in doubt of the gauge point, refer to the informa-
tion on the CUT SCREEN for the key to be cut (see
4.1
“Cutting by DSD”, step 6 in this manual for information on
the CUT SCREEN).
Important: The shoulder and tip gauges have safety switches. The cutter motor will not power on until the gauges
are lowered to their rest position. The Touch Screen will indicate to lower the gauges if necessary
Loosen the wing nut and place the key blank between the top and bottom jaw. The bottom of the key blank should
be against the back of the bottom jaw. Make sure that the key is level in the jaw.
3.2 Gauging Methods
INCORRECT INCORRECT CORRECT
Bow is not flush
with back of Jaw.
Tip is not flush
with back of Jaw.
Typical shoulder gauging for standard keys.
Typical tip gauging.
SIDE VIEW
SIDE VIEW
SIDE VIEW