HPC Match Lit, Инструкция по установке и эксплуатации

Страница: 6 / 10

6
8/8/2014 800
Installation
We suggest that our products be installed by professionals
that are locally licensed by the authority having
jurisdiction in gas piping.
6) Parts List
Part/Model FR/FRS Fire Ring
Dual, Round, Square, or Rectangle
FP/FPS
Fire Pit Kit
Trough FRS T-Burner Trough FPS Fire
Pit Kit
Burner * * * *
Pan *
Properly Sized Orifice for Natural Gas Provided By Qualified Installer For NG < 300 K Provided By Qualified Installer All Sizes
Properly Sized Air-Mixer for LP For LP For LP For LP For LP
Coupler * *
Flex Line or Nipple * *
Key Valve * *
Flare Fittings *
Elbow * *
Lava Rock * *
Burner Brackets, Center Hole Cover *
Plate for LP For LP
Instructions * * * *
7) Assembly
WARNING : If a fire ring or “T burner” will be used indoors it is the
installer’s responsibility to follow all regulations, local codes and achieve
independent certifications.
WARNING :
Confirm “Gas In” is towards control valve or shutoff valve. Installing
backwards will result in severe gas leak and risk of explosion. If your air- mixer has an
adjustment nut adjust to desire flame condition.
WARNING: A pan must be used on LP systems and configured in way to minimize fuel
settling below the pan. Failure to do so may result in personal injury or explosion.
1) Ensure gas to the fire pit location is shut off.
2) Remove parts from packaging material.
3) Read Instructions.
4) Call Manufacturer for clarification as needed.
5) Inspect the Burner for any signs of damage or corrosion.
6) Apply pipe dope or gas rated tape to all threads.
7) Hard pipe valve to burner.
8) Perform leak test on all fittings and back pressure checks for LP
.