HPC CodeMax Скачать руководство пользователя

Страница: 70 / 70

CodeMax

If your HPC Key Machine should require service, please note the following information:

HOURS:

The HPC Service Center answers questions involving key machine repair and replacement parts Monday

through Friday from

8:00 am to 3:30 pm Central time

Please call

800-323-3295

(from the U.S. and Canada) or

847-671-6280

(from other countries).

REPAIRS:

We recommend the replacement of cutters, brushes and external parts, the preventive maintenance and

recalibration (as outlined in this manual) be the only repairs or adjustments that are done by the user. Internal parts and

mechanisms should be factory-repaired only. Additional repair charges may be incurred by attempting to make these

types of repairs by yourself.

FACTORY SERVICE

: If you need to send your HPC key machine in for repair, first call the HPC Service Center

to obtain a Repair Order number, then follow these instructions:

Include a letter explaining the problem you are having, as well as any other work you want done on the machine. Make sure

your business name, address and phone number, as well as the name of the contact person are on the letter.

Your machine should be equipped with an HPC cutter when it is sent in for repairs. If you are sending in a Blitz

™

CodeMax

™

machine also include the Black Horseshoe Tip Stop to insure proper tip gauge calibration. Please do not send in

any other accessories (such as other cutters and code cards).

Pack the machine securely in a box strong enough to prevent damage during shipping (preferably the original box).

The Repair Order Number should be marked on the outside of the box.

All machines must be shipped prepaid. Collect shipments will not be accepted.

Our shipping address is:

HPC, Inc.

Attn. Service Center

3999 N. 25th Avenue

Schiller Park, IL 60176 USA

REPAIR CHARGES & ESTIMATES:

Upon receipt and evaluation of your machine our technicians will

provide a written estimate (by fax) of the repair charges. Some problems may be detected only while the repair work is being

done. If after informing you of the repair estimate it becomes apparent that the cost will be higher, you will be notified of the

additional charges before any additional work is done.

REPLACEMENT PARTS:

Key machine parts can be purchased through an Authorized HPC Distributor or

directly from the HPC Service Center. When ordering parts over the phone, please have the part numbers and descriptions

ready to expedite the ordering process. A parts listing and an exploded view drawing is included in this manual. If the parts

are needed urgently, express processing is available at an additional charge.

PAYMENT:

Payment for parts and repair is required at the time of repair and before the parts are shipped. We accept

payment by credit card (Visa, Mastercard or Discover) or by check. Repaired machines and parts can also be sent C.O.D.

with an extra charge. If you wish to have your Authorized HPC Distributor billed for the parts or repairs, the distributor must

call us with approval of the billing and provide a purchase order number for the parts or work being done, before the machine

is repaired or parts are shipped.

Unless otherwise specified, key machines that are not under warranty will be shipped C.O.D. with an extra charge after the

repairs have been made.

LOANER MACHINES:

Sorry, but we do not have loaner machines available.

HPC SERVICE CENTER

Содержание CodeMax







































































Результаты поиска

Содержание CodeMax

Отзывы:

Похожие инструкции для CodeMax

Бренды по названию

Популярные бренды

HPC CodeMax, Руководство пользователя

Результаты поиска

Содержание CodeMax

Отзывы:

Похожие инструкции для CodeMax

Бренды по названию

Популярные бренды