HPA PM 6200, Руководство пользователя

Страница: 17 / 20

15
PM6200 Specifi cations
Specifi cations
*0dB=0.775Vrms, 0dBV=1VRMS
-General Speci
fi cations
Maximum Output power
200W + 200W/4 Ω @ 1% THD at 1khz
400W/8 Ω 1% THD at 1khz(BRIDGE)
T.H.D
<1% @ 200W output into 4 Ω (AMP OUT 1,2)
<0.1% @+14dB 20Hz ~ 20kHz (MAIN, MONITOR,EFX OUT)
Frequency Response
20Hz ~ 20kHz, +1/-2dB @1W output into 4 Ω (AMP OUT 1,2)
20Hz ~ 20kHz, +1/-2dB @ +4dB output (MAIN, MONITOR,EFX OUT)
Hum and Noise (Average,
Rs=150
Ω )
(with 20Hz ~ 20kHz BPF)
-121dB equivalent input noise -95dB residual noise (MAIN OUT, AUX1 /AUX2 )
-88dB (MAIN MONITOR OUT) * Master VR at nominal level and all channel VR Minimum.
-75dB (EFX OUT) * Master VR at nominal level and all channel VR Minimum.
Maximum Voltage Gain
66dB MIC IN TO AMP
48dB MIC IN TO MAIN OUT, MONITOR OUT
54dB MIC IN TO AUX2/EFX
32dB LINE IN TO MAIN OUT,MONITOR OUT
38dB LINE IN TO AUX2/EFX OUT
26 dB TAPE IN TO MAIN OUT
Crosstalk (at 1kHz) -70dB between input channels -70dB between output channels
Input Channel Equalization
HIGH: 12kHz shelving, MID : 2.5kHz peaking LOW: 80Hz shelving * Turnover/roll off frequencies:
located 3dB below maximum boost/cut
LED Meters 7 POINTS LED METER(-20, -10, -7, -4, 0, +3, +6dB) MAIN,MONITOR OUT
Graphic Equalizer 7 bands (63, 160, 400, 1K, 2.5K, 6.4K, 16K)  ±12dB maximum
Internal Digital Effect
100 selectable presets
FOOT switch (ON/OFF)
Phantom Power +36V DC
CLIP indicators Turns on : THD<0.1%
Protection Circuit Power switch on/off, Mute, DC fault Detection, Temp(Heatsink)
Power Source/Power Con-
sumption
AC 120V/230V/240V, 50/60Hz, 600W (full)
Weight 13.25kg
Dimensions ( W x D x H)mm 480 x 310 x 262mm
*
Speci fi cations and design subject to change without notice for improvements.