HPA PM 6200, Руководство пользователя

Страница: 11 / 20

9
PM6200
Connections
Connections
CAUTION:
When connecting devices to your PM6200, avoid using non-standard plugs and cables.
-SPEAKER CONNECTION
The diagram below presents three approved PM6200 speaker setups. Please take notice of the speaker
impedance (
Ω ) requirements of each and be careful to avoid impedances lower than those speci fi ed.
When connecting one speaker to POWER
AMP1 and speaker to POWER AMP2, use
speaker with a 4-8
Ω impedance rating
When connecting two speakers to POWER
AMP1 and two speakers to AMP2, use
speakers with a 8-16
Ω impedance rating
AMP 1
MAIN BRIDGE
AMP 2
R 200W X 2
AMP 1
MAIN BRIDGE
AMP 2
In this example, each pair of speakers
is wired in Parallel or “daisy - chained”
together using the speaker’s Extension
output, so the total impedance when two
8Ω speakers are connected is 4Ω.
BRIDGE CONNECTION
AMP 1
MAIN BRIDGE
AMP 2
When the POWER AMPS are in
BRIDGE use a speaker
With a 8
Ω ~ 16 Ω impedance rating