Creating RAID volumes
To create RAID volumes, use the Intel Rapid Storage Manager option ROM Configuration utility.
1.
To enter the Intel Rapid Storage Manager option ROM Configuration utility, press
Ctrl+l
when
prompted.
2.
If required, refer the computer
Maintenance and Service Guide
to make available enough
physical drives to create the RAID volume.
3.
Use the up or down arrow key to highlight
1. Create RAID Volume
, and then press
Enter
.
4.
Type the desired RAID volume name in the Name: field, and then press
Tab
.
5.
Use the up or down arrow key to select the RAID level in the RAID Level: field, and then press
Tab
.
6.
If three or more hard drives are installed (for workstations that support three or more hard drives):
a.
Press
Enter
to display the Select dialog.
b.
Use the up and down arrow keys and Space to mark individual physical as members of the
volume.
c.
Press
Enter
to exit the Select dialog and return to the Create Volume Menu dialog.
7.
If appropriate, use the up or down arrow key to select the Strip Size in the Strip Size: field, and
then press
Tab
.
8.
Enter the desired volume size in the Capacity: field, and then press
Tab
.
9.
Press
Enter
to initiate volume creation.
10.
When prompted, press
Y
to acknowledge the warning message and create the volume.
11.
Use the up or down arrow key to highlight
5. Exit
, and then press
Enter
.
12.
Press
Y
when prompted to confirm the exit.
176
Chapter 7 Configuring RAID devices
ENWW
Содержание Z200 - Small Form Factor Workstation
Страница 1: ...HP Z200 Small Form Factor Workstation Maintenance and Service Guide ...
Страница 4: ...iv About this guide ENWW ...
Страница 12: ...xii ENWW ...
