HP Vectra XU 6/XXX, Руководство пользователя

Страница: 57 / 168

English 45
3 How to Install Accessories Inside Your PC
Installing Memory
3 Slide each memory module into the slot at 90° to the system board
(hold the memory module with the cutouts closest to the processor).
4 Firmly press each memory module completely into the connector
until the retaining clips click into position.
5 Repeat this procedure for each pair of memory modules you are
installing.
6 Install any other accessories before replacing the cover (see page
38). Reconnect all cables and power cords.
Completing the Main Memory Installation Procedure:
1 Switch on the PC. When
Error 0250
appears (indicating that the
Power-On-Self-Test has detected a change in your memory
configuration) follow the displayed instructions to run the Setup
program.
2 Check that Setup has automatically detected and configured the
Memory Size
fields. Ensure the
TOTAL
memory is correct. If it is
incorrect, check that you have correctly installed the memory
modules.
3 Set the extended memory limit field to
Y
if you use software designed
for i286 processors (or earlier processors) that cannot work with
more than 16 MB total memory.
4 Press to save and exit the Setup program.
Slide the memory module into
the slot at 90
o
Push the module until the retaining clips
click into position