HP Vectra VL6 8, Руководство пользователя

Страница: 10 / 62

1 Setting Up and Using Your PC
Unpacking Your PC
2 English
Unpacking Your PC
WARNING If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
1 Unpack all the components.
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories. You can either place the PC horizontally (flat on the
desk) or vertically (on its side), with the floppy drive at the top.
3 Position the PC so that its rear connectors are easily accessible.
4 Refer to the display’s manual for information about the display.
Operating System
Your PC’s operating system is preloaded on your PC’s hard disk drive
and is set up when you start your PC for the first time.
Installation Tools
No tools are required to set up your PC. However, if you plan to install a
disk drive, you may need a screwdriver. For further information about
installing accessories, refer to chapter 2,
How to Install Accessories In
Your PC
.
Computer
Typical Display
Mouse
Keyboard