HP Vectra VE 5/xx Series, Руководство пользователя

Страница: 97 / 148

English 85
5 Troubleshooting Your PC
If Your PC Has a Hardware Problem
If the Flexible Disk Drive Does Not Work
•
Ensure you are using a formatted diskette and it is inserted
correctly.
•
Check you are using a diskette that is the right density.
•
Check that your FDD is correctly declared in the Setup
Configuration
menu.
•
Check that the correct diskette type has been configured in
Setup
.
•
Check that the flexible disk drive has been enabled in
Setup
. There
are three options in the
Setup
Security
menu that you can use to
disable or enable:
•
Boot on flexible disk drive
•
Write on flexible disk drives
•
Use of flexible disk drive.
•
Check the option on the Setup
Configuration
menu which
enables or disables the on-board flexible disk controller.
•
Check that the disk power and data cables are correctly connected.
•
Clean the flexible disk drive using a diskette cleaning kit.
If the Hard Disk Does Not Work
•
Check that the disk power and data cables are correctly connected.
•
Check that the hard disk drive has been enabled and detected on the
Hard Disk
menu in
Setup
. There is also an option on the
Setup
Security
menu which allows you to disable or enable boot on hard
disk drive.
•
Check that the on-board Bus IDE is enabled if you are using the on-
board IDE controller.
uno1.bk : uno1-ch5.fb4 Page 85 Friday, July 18, 1997 3:22 PM