background image

5   Troubleshooting Your PC

If Your PC Does Not Start Properly

76

English

Check Internal Items

If the PC still does not start properly, follow this procedure to check the 
internal items:

1

Turn off the display, the computer, and all external devices.

2

Unplug all power cords and cables, noting their positions. Disconnect 
any telecommunications connection.

3

Remove the cover.

4

Check the following items:

5

Replace the cover.

6

Reconnect all cables and power cords.

7

Turn on the display and computer.

Reconstruct Your PC’s 
Components

If your PC still does not start properly, remove all boards and 
accessories, except the hard disk drive. Start the PC. If the PC now 
works, add the boards and accessories one at a time to determine which 
one is causing the problem.

Action

Reference

Check all internal cables.

Ensure they are correctly attached and firmly in place.

Check that the processor is 
correctly installed.

Refer to “Installing an Upgrade Processor” on page 51.

Check that the processor speed 
switches have been set correctly.

Refer to “System Board Connectors and Switches” on page 104.

Check that the memory modules 
are correctly installed.

Refer to “Installing Memory” on page 24.

Check that accessory boards are 
firmly seated in their slots.

Refer to “Installing Accessory Boards” on page 29.

Verify that any switches and 
jumpers on the accessory boards 
are properly set.

Refer to the manuals that came with each board.

Check that the switches on the 
system board are properly set.

Refer to “System Board Connectors and Switches” on page 104.

uno1.bk : uno1-ch5.fb4  Page 76  Friday, July 18, 1997  3:22 PM

Содержание Vectra VE 5/xx Series





















































































































































Отзывы: