HP Vectra VE 5/100 series 2 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 54

background image

10

1 Product Overview and Features

Product Features

Flexible Disk Controller

The integrated flexible disk controller is on the ISA bus and supports two
devices. Flexible disk drives and tape drives can be connected to this
controller.

IDE Disk Controller

The integrated IDE hard disk controller is on the PCI bus. This controller has
two channels, each with a separate data cable and system board connector.
Each channel supports up to two devices.

The primary channel is marked

HDD

on the system board and is

recommended for hard disk drives. Connecting a CD-ROM drive to this
channel is not recommended, as the CD-ROM drive can slow down the
transfer rate of a faster IDE device.

On the primary channel data cable, the inside device connector is used for
the master (bootable) drive, and the outside (or end) device connector for
the slave drive. This is true as long as the Cable Select (CS) jumper on the
IDE device is set (default factory configuration).

The secondary channel is marked

CD-ROM

on the system board and has red

device connectors. This channel is for a supplementary hard disk drive or
CD-ROM drive. The cable has one device connector, allowing a single IDE
device to be connected.

Mounting Rails

To install non-HP drives (hard disk drives, tape drives, CD-ROM drives) in
the front access slots, the Mounting Rails Kit

5063-7922

must be ordered.

This kit contains two sets of rails, one for a 3.5-inch drive and one for a 5.25-
inch drive.

Supported Drives

Flexible disk drives:

❒

3.5-inch, 1.44 MB flexible disk drive (D2035B)

❒

5.25-inch, 1.2 MB flexible disk drive (D2881B)

Hard disk drives:

❒

3.5-inch, 640 MB IDE hard disk drive (D2929A)

❒

3.5-inch, 1.2 GB IDE hard disk drive (D2930A)

CD-ROM drives:

❒

Quad-speed (4x) IDE CD-ROM drive (D2896B)

uno1-fam.bk : uno1_ch1.fb4 Page 10 Friday, July 18, 1997 2:33 PM

«
...
12
13
14
15
16
...
»

Содержание Vectra VE 5/100 series 2























































Отзывы:

Нет отзывов

Похожие инструкции для Vectra VE 5/100 series 2

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 18

Бренд: Acer Страницы: 30

Бренд: Radio Shack Страницы: 31

Бренд: Advantech Страницы: 31

Бренд: A1Touch Страницы: 8

Бренд: E-Medic Страницы: 31

BRIX GB-BACE-3150

Бренд: Gigabyte Страницы: 2

UTC-520FP-IKA0E Series

Бренд: Advantech Страницы: 2

Бренд: Advantech Страницы: 94

Vaio VGN-CR515E

Бренд: Sony Страницы: 2

LCD Computer and Touchscreen

Бренд: Tek Panel Страницы: 2

VAIO VGN-FS620W

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

VAIO VGN-CS280J/R

Бренд: Sony Страницы: 2

VAIO VGN-CS280J/Q

Бренд: Sony Страницы: 2

VAIO VGN-CS280J/P

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды