HP V213a, Руководство пользователя

Страница: 19 / 27

ENWW Using the On-Screen Display (OSD)
15
Sleep Timer Provides the timer adjustment menu options:
• Set Current Time-sets the current time in hours
and minutes
• Set Sleep Time-sets the time you want to place
the monitor In sleep mode
• Set on Time-sets the time you want the monitor
to wake up from sleep mode
• Timer-sets the Sleep Timer feature On or Off.
The default setting Is Off
• Sleep Now-Immediately sets the monitor to
enter sleep mode
Language Selects the language in which the OSD menu Is
displayed. The factory default Is English.
Information Selects and displays important information about
the monitor.
Current Settings Provides the current input video mode.
Recommended
Settings Provides the recommended resolution mode and
refresh rate for the monitor.
Serial Number Reports the serial number of the monitor. The serial
number Is needed if contacting HP technical
support.
FW Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI
controls to the factory default settings, except the
Language.
Source Control Selects the video input signal. VGA is the factory
default.
DVI Selects DVI as the video input signal.
VGA Selects VGA as the video input signal.
Default Source Selects the default or primary video input signal
when the monitor is connected to two active and
valid video sources. The monitor will automatically
determine the video format. The choices are:
• DVI
• VGA
Auto-Switch Source Turns the system's automatic video signal input to
On or Off. The factory default is On.
Exit Exits the OSD menu screen.
OSD MENU
Icon Main Menu Submenu Description