Figure 7-13
Converter board jumper settings
To remove the converter board:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 40
).
2.
Remove the rear cover (see
Rear Cover on page 41
).
3.
Disconnect the 2 cables from the board
(1)
.
NOTE:
Be careful not to damage the cables when disconnecting them from the board. Do not
pull on the wires.
4.
Remove the 2 Torx screws
(2)
that secure the board to the computer.
Figure 7-14
Removing the converter board
5.
Lift the converter board from the computer.
To install the converter board, reverse the removal procedures.
Converter Board
53
