HP TeemTalk Terminal Emulator 7.0, Руководство пользователя

Страница: 295 / 340

Command Line Options
Window Appearance 279
Window Appearance
Do Not Show
Splash Screen
Command Line: -spl
This prevents the initial splash screen from being displayed when
TeemTalk is started.
Show Window Full
Screen
Command Line: +wfs
This will cause the emulation workspace to fill the screen. Note that
this also removes the window frame, soft buttons, menu and
configuration bars.
Show Window
Minimized
Command Line: +wmn
This will cause the TeemTalk window to be minimized on startup.
Show Window
Maximized
Command Line: +wmx
This will cause the TeemTalk window to be maximized on startup.
Set Window
Position
Command Line: +pos left , down
This specifies the position of the top left corner of the TeemTalk
window relative to the top left corner of the display. The numeric
value of
left and down (separated by a comma) specifies the number
of pixels. For example, to position the window 200 pixels from the
left edge of the display and 100 pixels down, you would use the
following entry:
+pos200,100 .
Set Window Size
Command Line: +siz width , depth
This specifies the size of the TeemTalk window. The numeric value
of
width and depth (separated by a comma) specifies the number of
pixels. For example, to specify a window size of 1280 by 1024
pixels you would use the following entry:
+siz1280,1024 .