HP TeemTalk Terminal Emulator 7.0, Руководство пользователя

Страница: 222 / 340

IBM 5250 Display Emulation
206 Record & Playback Keystrokes Facility
The status line will display R**** F* where R indicates you are
in Record mode, **** is the number of keystrokes that may be
stored, and
F* is the number of the Fn key pressed.
Note: If you press a pre-recorded Fn key, its contents will be
replaced with the following keystrokes. You can also remove the
contents of the
Fn key before recording by pressing the Delete
key.
3
Enter the keystrokes to be recorded.
You may pause recording at any time to allow keystrokes to be
entered manually when played back by pressing
Pause . Pause
mode is indicated by the following symbols on the status line.
To continue recording, press
Pause again.
Note: You can cancel the newly recorded keystrokes by pressing
the Quit key. This cancellation does not affect the previously
recorded keystrokes.
4
To finish and save the recording, press the Record key.
Playback
Keystrokes
1
Position the text cursor where the playback is to start.
2
Press the Play key to enter Play mode.
The status line will display
PLAY
and a series of boxes represent-
ing the Fn keys. A solid box indicates that the Fn key in that
position is currently storing recorded keystrokes.
3
Press the Fn key storing the recorded data to play back.
Playback will begin immediately, as indicated by a
P
on the
status line. All the recorded keystrokes will be played back
automatically. When playback is completed the
P
will disappear.