HP Tc4100 - Server - 256 MB RAM Скачать руководство пользователя страница 5

5

Warranty and Support

This HP Server accessory is covered by a limited hardware warranty for a period of one year from receipt by the original 
end-user purchaser.

Once installed in an HP Server, this accessory may carry the longer of either a one-year warranty or the remainder of the 
warranty period for the HP Server in which it is installed.

This accessory may be serviced through expedited part shipments. In this event, HP will prepay shipping charges, duty, 
and taxes; provide telephone assistance on replacement of the component; and pay shipping charges, duty, and taxes for 
any part that HP asks to be returned.

The customer may be required to run HP-supplied configuration and diagnostic programs before a replacement will be 
dispatched or an on-site visit is authorized.

Refer to the warranty statement provided with your original HP Server system documentation for the warranty 
limitations, customer responsibilities, and other terms and conditions.

HP Repair and Telephone Support

Refer to the  

Warranty & Support for your HP Server

 booklet supplied with your HP Server system documentation for 

instructions on how to obtain HP repair and telephone support.

Содержание Tc4100 - Server - 256 MB RAM






Отзывы: