HP Synergy 480 Gen9, Руководство по техническому обслуживанию и ремонту, Страница: 34 / 71

To replace the component, reverse the removal procedure.
Removing and replacing a compute module end cap
To remove the component:
Procedure
1. Place the compute module on a flat, level work surface.
2. Remove the compute module end cap.
To replace the component, reverse the removal procedure.
Removing and replacing the front panel/drive cage assembly
Procedure
1. Power down the compute module .
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove all drives .
6. Remove the front panel/drive cage assembly.
34 Removing and replacing a compute module end cap