HP Synergy 480 Gen9 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 71

HP Synergy 480 Gen9 Скачать руководство пользователя страница 54

Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.

7.

Enter the product ID and press the

Enter

key.

8.

To confirm exiting System Utilities, press the

F10

key.

9.

The compute module automatically reboots.

HP Trusted Platform Module

The TPM is not a customer-removable part.

CAUTION:

Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the
system compromised and take appropriate measures to ensure the integrity of the system data.

If you suspect a TPM board failure, leave the TPM installed and

remove the system board

Hewlett Packard Enterprise authorized service provider for a replacement system board and TPM board.

Dual 8Gb microSD Enterprise Midline USB device

This compute module supports the installation of the Dual 8Gb microSD Enterprise Midline USB device on the
compute module internal USB connector.

This USB storage device contains a dual-SD card module that supports up to two SD, SDHC, or SDXC
storage cards providing data redundancy through a mirrored RAID-1 configuration. This USB storage device
connects to an internal USB connector and is configured upon boot.

To locate the internal USB connector, see "

System board components

." For more information, see the Dual

8Gb microSD EM USB storage device documentation on the

Hewlett Packard Enterprise website

.

54

HP Trusted Platform Module

«
...
52
53
54
55
56
...
»

Содержание Synergy 480 Gen9








































































Отзывы:

Нет отзывов