![background image](http://html.mh-extra.com/html/hp/surestore-tape-library-model-2-15/surestore-tape-library-model-2-15_user-manual_163211033.webp)
2-7
Library Installation
Step 5: Set the SCSI Interface Mode Switch
L
ib
r
a
r
y
Ins
ta
lla
tio
n
Step 5: Set the SCSI Interface Mode Switch
Do not connect any cables yet.
The SCSI interface mode switch, shown below, is on the rear panel between
the bus 1 and bus 2 SCSI ports.
Figure 2-1
SCSI Interface Mode Switch
To set the SCSI interface mode switch:
1. Determine how to connect the library according to:
•
Number of drives in the library and drive type (only DLT4000 drives
are supported as daisy-chained)
•
Number of SCSI cards
2. Set the SCSI interface mode switch.
Table 2-3
SCSI Interface Mode Switch Settings
Setting
Purpose
Set to
Term Pwr
Sends power to the terminator
ON in most installations
Termination
Terminates the SCSI bus; functions
the same as a physical terminator
ON if one port on the bus is open
OFF if both ports on the bus are
connected to a cable
DIFF/SE
Specifies interface mode
DIFF for differential
Содержание Surestore Tape Library Model 2/15
