HP Surestore 64 - Director Switch, Руководство по установке, Страница: 4 / 10

H
4 of 8
Step 5: Insert the rail tray in the rack
Position the rail tray as shown in the following figure
and insert it into the rack from the front. The slots in
the sides of the rail tray must slide over the posts on
the rear rail-tray brackets, and the posts on the rail
tray’s front mounting flanges must be inserted in the
center holes of U1.
Step 6: Secure the rail tray
Insert the M5 Torx screws through the top holes in
both of the rail tray mounting flanges. The screws
pass through the holes in the rack uprights and
thread into the Tinnerman nuts you installed on the
uprights in Step 4. Tighten the screws.
Step 7: Prepare the front rack columns
Standing at the front of the rack, count up from the
top of the rail tray (A) to the 13th, 19th, and 23rd
holes on the rack's front face.
Slide a sheet metal nut (B) on each of the located
holes. You should have three sheet metal nuts on
each front column face (C).