HP Surestore 64 - Director Switch, Руководство по установке

Страница: 1 / 10

Model A6534A hp surestore director fc-64
Installation Guide
Contents
(A) hp surestore director fc-64 (PN A6534-62001)
(B) Rail Tray Kit (PN A6534-60016):
•
Rail tray (1)
• Mounting brackets (2)
• M5 Tinnerman nuts (2)
• Torx T25 16mm M5 SEM screws (4)
(C) Sliding Shelf - only available with the Management
Station (PN J1526-60001):
•
Shelf with attached rails (1)
• Mounting brackets (2)
• Torx T25 16mm M5 SEM screws (4)
(D, E, & F) Mounting Hardware:
•
Rack mount brackets (PN A6534-60014) containing front
mounting brackets (2), rear mounting brackets (2), and
angle brackets (2)
• Switch rack hardware (PN A6534-62002) containing Torx
T25 16mm M5 SEM screws (22, includes extras), sheet
metal nuts (18), and 10-32 flat-head Phillips screws (8,
includes extras)
Tools Needed:
•
Phillips head screwdriver, no.2
• Torx head driver T25
General Information: The 15Us used to mount the switch
are called U1 through U15; U1 is the lowest of the 15Us.
Notice
The information contained in this document is subject to change without
notice.
Hewlett-Packard makes no warranty of any kind with regard to this
material, including, but not limit to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard shall
not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing performance, or use of this
material.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language without the
prior written consent of Hewlett-Packard Company.