Power connector cable
Table 5-11
Power connector cable description and part number
Description
Spare part number
Power connector cable
810327-004
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 23
).
2.
Remove the bottom cover (see
).
3.
Disconnect the battery cable from the system board (see
4.
Remove the display assembly (see
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
2.
Release the power connector (2) from the retention clips built into the bottom cover.
3.
Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.
Component replacement procedures
43
Содержание Stream 14
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 39: ...Reverse this procedure to install the heat sink Component replacement procedures 31 ...