c.
Remove the camera/microphone module (3).
The camera/microphone module is available using spare part number L02790-001.
9.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Detach the WLAN antenna transceivers (1) from the display back cover. (The WLAN antenna
transceivers are attached to the display back cover with double-sided adhesive.)
b.
Release the WLAN antenna cables from the clips (2) and routing channel built into the top and left
edges of the display back cover.
c.
Remove the WLAN antenna cables and transceivers (3).
The WLAN antenna cables and transceivers are available using spare part number 902946-001.
Reverse this procedure to reassemble install the display assembly.
42
Chapter 5 Removal and replacement procedures