Reverse this procedure to install the WLAN module.
Heat sink
Description
Spare part number
Heat sink (includes replacement thermal material)
L02781-001
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the battery (see
).
Remove the heat sink:
1.
Remove the two Phillips PM2.0×2.2 broad head screws (1) that secure the heat sink to
the system board.
28
Chapter 5 Removal and replacement procedures
