Power connector
Description
Spare part number
Power connector
743480-004
Before removing the power connector, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
).
5.
Remove the system board (see
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
2.
Remove the Phillips PM2.0×3 screw (2) that secures the power connector to the base enclosure.
3.
Remove the power connector (3).
Reverse this procedure to install the power connector cable.
Power button board
NOTE:
The power button board spare part kit does not include the power button board cable. The power
button board cable is available using spare part number 830757-001.
Component replacement procedures
33
