HP StorageWorks x9300, Руководство администратора

Страница: 74 / 131

3. Launch the Windows Installer and follow the instructions to complete the upgrade.
4. Register the Windows X9000 client again with the cluster and check the option to Start Service
after Registration .
5. Check Administrative Tools | Services to verify that the X9000 Client service is started.
6. Launch the Windows X9000 client. On the Active Directory Settings tab, click Update to
retrieve the current Active Directory settings.
7. Mount file systems using the X9000 Windows client GUI.
NOTE: If you are using Remote Desktop to perform an upgrade, you must log out and log back
in to see the drive mounted.
Troubleshooting upgrade issues
If the upgrade does not complete successfully, check the following items. For additional assistance,
contact HP Support.
Automatic upgrade
Check the following:
•
If the initial execution of
/usr/local/ibrix/setup/upgrade
fails, check
/usr/local/ibrix/setup/upgrade.log
for errors. It is imperative that all servers are
up and running the X9000 Software before you execute the upgrade script.
•
If the install of the new OS fails, power cycle the node. Try rebooting. If the install does not
begin after the reboot, power cycle the machine and select the
upgrade
line from the
grub
boot menu.
•
After the upgrade, check
/usr/local/ibrix/setup/logs/postupgrade.log
for errors
or warnings.
•
If configuration restore fails on any node, look at
/usr/local/ibrix/autocfg/logs/appliance.log
on that node to determine which
feature restore failed. Look at the specific feature log file under
/usr/local/ibrix/setup/
logs/
for more detailed information.
To retry the copy of configuration, use the command appropriate for your server:
◦
A dedicated management console:
/usr/local/ibrix/autocfg/bin/ibrixapp upgrade -f
◦ A file serving node:
/usr/local/ibrix/autocfg/bin/ibrixapp upgrade –s
◦
An agile node (a file serving node hosting the agile management console):
/usr/local/ibrix/autocfg/bin/ibrixapp upgrade –f –s
•
If the install of the new image succeeds, but the configuration restore fails and you need to
revert the server to the previous install, execute
boot_info –r
and then reboot the machine.
This step causes the server to boot from the old version (the alternate partition).
•
If the public network interface is down and inaccessible for any node, power cycle that node.
74 Upgrading the X9000 Software