manualshive.com logo in svg

HP StorageWorks x9300, Руководство администратора

Вам нужно загрузить административное руководство для устройства HP StorageWorks x9300? На нашем сайте вы можете бесплатно скачать этот manual. Посетите manualshive.com прямо сейчас, чтобы получить всю необходимую информацию по продукту.

Поделиться
Скачать
background image

    lab15-62 Report
    ===============
    Overall Result
    ==============
    Result  Type    State         Module  Up time    Last Update                   
Network       Thread  Protocol
    ------  ------  ------------  ------  ---------  ----------------------------  
------------  ------  --------
    PASSED  Server  Up, HBAsDown  Loaded  3267210.0  Mon Oct 19 14:24:34 EDT 2009  
99.126.39.72  16      true    

    CPU Information
    ===============
    Cpu(System,User,Util,Nice)  Load(1,3,15 min)  Network(Bps)  Disk(Bps)
    --------------------------  ----------------  ------------  ---------
    0, 1, 1, 0                  0.73, 0.17, 0.12          1301       9728

    Memory Information
    ==================
    Mem Total  Mem Free  Buffers(KB)  Cached(KB)  Swap Total(KB)  Swap Free(KB)
    ---------  --------  -----------  ----------  --------------  -------------
      1944532   1841548          688       34616         1028152        1028048

    Version/OS Information
    ======================
    Fs Version         IAD Version  OS         OS Version                                              Kernel 
Version  Architecture  Processor
    -----------------  -----------  ---------  --------------------------------------------
----------  --------------  ------------  ---------
    5.3.468(internal)  5.3.446      GNU/Linux  Red Hat Enterprise Linux Server release 5.2 
(Tikanga)   2.6.18-92.el5   i386          i686     

    Remote Hosts
    ============
    Host      Type    Network       Protocol  Connection State
    --------  ------  ------------  --------  ----------------
    lab15-61  Server  99.126.39.71  true       S_SET S_READY S_SENDHB
    lab15-62  Server  99.126.39.72  true       S_NEW          

      Check Results
      =============
      Check : lab15-62 can ping remote segment server hosts
      =====================================================
      Check Description                Result  Result Information
      -------------------------------  ------  ------------------
      Remote server lab15-61 pingable  PASSED                    

      Check : Physical volumes are readable
      =====================================
      Check Description                                                Result  Result 
Information
      ---------------------------------------------------------------  ------  -------
-----------
      Physical volume 0ownQk-vYCm-RziC-OwRU-qStr-C6d5-ESrMIf readable  PASSED  /dev/sde          
      Physical volume 1MY7Gk-zb7U-HnnA-D24H-Nxhg-WPmX-ZfUvMb readable  PASSED  /dev/sdc          
      Physical volume 7DRzC8-ucwo-p3D2-c89r-nwZD-E1ju-61VMw9 readable  PASSED  /dev/sda          
      Physical volume YipmIK-9WFE-tDpV-srtY-PoN7-9m23-r3Z9Gm readable  PASSED  /dev/sdb          
      Physical volume ansHXO-0zAL-K058-eEnZ-36ov-Pku2-Bz4WKs readable  PASSED  /dev/sdi          
      Physical volume oGt3qi-ybeC-E42f-vLg0-1GIF-My3H-3QhN0n readable  PASSED  /dev/sdj          
      Physical volume wzXSW3-2pxY-1ayt-2lkG-4yIH-fMez-QHfbgg readable  PASSED  /dev/sdd          

      Check : Iad and Fusion Manager consistent
      =========================================
      Check Description                                                                                Result 
 Result Information
      ---------------------------------------------------------------------------------
--------------  ------  
      lab15-61 engine uuid matches on Iad and Fusion Manager                                           PASSED 

      lab15-61 IP address matches on Iad and Fusion Manager                                            PASSED 

      lab15-61 network protocol matches on Iad and Fusion Manager                                      PASSED 

      lab15-61 engine connection state on Iad is up                                                    PASSED 

      lab15-62 engine uuid matches on Iad and Fusion Manager                                           PASSED 

      lab15-62 IP address matches on Iad and Fusion Manager                                            PASSED 

      lab15-62 network protocol matches on Iad and Fusion Manager                                      PASSED 

      lab15-62 engine connection state on Iad is up                                                    PASSED 

      ifs2 file system uuid matches on Iad and Fusion Manager                                          PASSED 

      ifs2 file system generation matches on Iad and Fusion Manager                                    PASSED 

      ifs2 file system number segments matches on Iad and Fusion Manager                               PASSED 

      ifs2 file system mounted state matches on Iad and Fusion Manager                                 PASSED 

      Segment owner for segment 1 filesystem ifs2 matches on Iad and Fusion Manager                    PASSED 

50

Monitoring cluster operations

Содержание StorageWorks x9300




































































































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks x9300

Balluff Subnet16 BIS Z-GW-001-IND Installation Manual preview
Subnet16 BIS Z-GW-001-IND
Бренд: Balluff Страницы: 2
Genexis Pure F500 Installation Manual preview
Pure F500
Бренд: Genexis Страницы: 5
ZyXEL Communications HLA3105 User Manual preview
HLA3105
Бренд: ZyXEL Communications Страницы: 2
Topex TOPEX MobiLink IP User Manual preview
TOPEX MobiLink IP
Бренд: Topex Страницы: 80
Sierra Wireless AirLink RV50 Series Hardware User'S Manual preview
AirLink RV50 Series
Бренд: Sierra Wireless Страницы: 78
Perenio PEACG01 Installation And Operation Manual preview
PEACG01
Бренд: Perenio Страницы: 32
FireAngel WG-2 Installation Manual preview
WG-2
Бренд: FireAngel Страницы: 8
2Wire HomePortal 3800HGV-B User Manual preview
HomePortal 3800HGV-B
Бренд: 2Wire Страницы: 82
Fanvil ATA Quick Installation Manual preview
ATA
Бренд: Fanvil Страницы: 5
HMM hLine User Manual preview
hLine
Бренд: HMM Страницы: 41
Wildix W04FXS Quick Installation Manual preview
W04FXS
Бренд: Wildix Страницы: 6
Wildix BRI Quick Installation Manual preview
BRI
Бренд: Wildix Страницы: 4
Wildix W01GSM Quick Start Manual preview
W01GSM
Бренд: Wildix Страницы: 5
Taylor TAYLOR-GTW-2A Installation Manual preview
TAYLOR-GTW-2A
Бренд: Taylor Страницы: 18
Telsyco MiniGate A Installation Manual preview
MiniGate A
Бренд: Telsyco Страницы: 17
Jaze hotspot gateway User Manual preview
hotspot gateway
Бренд: Jaze Страницы: 102
3Com VCX V7122 Installation Manual preview
VCX V7122
Бренд: 3Com Страницы: 58
3Com OfficeConnect 3CRWE41196 User Manual preview
OfficeConnect 3CRWE41196
Бренд: 3Com Страницы: 88

Бренды по названию

Популярные бренды

Загрузить еще бренды