HP StorageWorks SDLT 320, Справочное руководство

Страница: 54 / 74

Electrostatic Discharge
42 SDLT Tape Drives Reference Guide
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
■ Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1
megohm ± 10 percent resistance in the ground cords. To provide proper
grounding, wear the strap snug against the skin.
■
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor
mats.
■ Use conductive field service tools.
■ Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an
authorized reseller install the part.
Note: For more information on static electricity, or for assistance with product
installation, contact your authorized reseller.
201412-003.book Page 42 Thursday, October 3, 2002 9:05 AM