HP StorageWorks NAS e7000 v2 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 70

background image

Beyond Initial Setup

50

NAS e7000 v2 Quick Start Guide

Introduction To Establishing a NAS Cluster

The Cluster Install Guide is available in the Cluster tab of the Web UI and is a
web-based guide designed to help the user install an HP StorageWorks NAS
e7000 v2 cluster. The online guide provides the necessary information required to
configure storage, configure the NAS e7000 v2 in preparation for clustering,
setting up cluster services, establishing the cluster and lastly installing updates to
make programs cluster aware.

The steps provided are necessary to cluster HP StorageWorks NAS servers.

Confirm that the following specifications have been met before proceeding:

■

When connecting to an MSA, the HP StorageWorks NAS only supports MSA
firmware version 2.38 and earlier. If using an MSA with firmware version
1.xx then obtain the free upgrade from the link provided at

www.hp.com

. This

upgrade will need to occur before connecting the MSA to an HP
StorageWorks NAS device.

■

The SAN connection tool must be completed and all the necessary software
components for connecting to the desired storage must be installed before the
configuration of cluster services.

■

It is required that at least one LUN has been presented for the configuration of
the Quorum disk. Additional LUNS may also be presented for use as shared
disk resources.

More detailed information about setting up clusters is available at:

http://www.microsoft.com/windows2000/techinfo/planning/server/clustersteps.asp

Each node of the cluster will be shut down during the Cluster Setup. Please be
sure to view this guide on a computer other than the two nodes to be clustered.
You may want to print this guide.

HP StorageWorks NAS Software Updates

Please be sure to read the section at the end of this document which discusses the
process to update HP StorageWorks NAS software to clustered versions. This
should only be done after the Cluster is install is complete and must be run on
both cluster nodes.

«
...
48
49
50
51
52
...
»

Содержание StorageWorks NAS e7000 v2







































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks NAS e7000 v2

Бренд: IBM Страницы: 54

BladeCenter HS23

Бренд: IBM Страницы: 28

Бренд: BandLuxe Страницы: 67

Бренд: LaCie Страницы: 22

FlashPen "Piko"

Бренд: Hama Страницы: 4

StorageLoader DLT VS160

Бренд: Tandberg Data Страницы: 13

StorageLoader DLT VS160

Бренд: Tandberg Data Страницы: 46

StorageLibrary LTO-3 SCSI

Бренд: Tandberg Data Страницы: 2

SDLT220-320 INTEGRATION

Бренд: Tandberg Data Страницы: 142

Бренд: Tandberg Data Страницы: 3

Бренд: Tandberg Data Страницы: 12

Бренд: Zhone Страницы: 7

grand Hard Disk

Бренд: LaCie Страницы: 2

Бренд: Datasheen Страницы: 25

Бренд: US Robotics Страницы: 156

Бренд: Quantum Страницы: 88

Бренд: SanDisk Страницы: 2

Бренд: Dell EMC Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды