HP StorageWorks NAS e7000 v2 Скачать руководство пользователя страница 11

Страница: 11 / 70

About this Guide

NAS e7000 v2 Quick Start Guide

Power supplies or systems marked with these symbols indicate the

presence of multiple sources of power.

WARNING:

To reduce the risk of personal safety from electrical

shock, remove all power cords to completely disconnect power

from the power supplies and systems.

Any product or assembly marked with these symbols indicates that the

component exceeds the recommended weight for one individual to

handle safely.

WARNING:

To reduce the risk of personal safety or damage to the

equipment, observe local occupational health and safety requirements

and guidelines for manually handling material.

Rack Stability

Rack stability protects personnel and equipment.

WARNING:

To reduce the risk of personal safety or damage to the

equipment, be sure that:

■

The leveling jacks are extended to the floor.

■

The full weight of the rack rests on the leveling jacks.

■

In single rack installations, the stabilizing feet are attached to the rack.

■

In multiple rack installations, the racks are coupled.

■

Only one rack component is extended at any time. A rack may become

unstable if more than one rack component is extended for any reason.

Содержание StorageWorks NAS e7000 v2







































































Результаты поиска

Содержание StorageWorks NAS e7000 v2

Отзывы:

Похожие инструкции для StorageWorks NAS e7000 v2

Бренды по названию

Популярные бренды

HP StorageWorks NAS e7000 v2, Быстрый старт

Результаты поиска

Содержание StorageWorks NAS e7000 v2

Отзывы:

Похожие инструкции для StorageWorks NAS e7000 v2

Бренды по названию

Популярные бренды