HP StorageWorks NAS e7000 v2, Быстрый старт

Страница: 23 / 70

Product Overview
23 NAS e7000 v2 Quick Start Guide
6. Place the NAS device into an active directory or Windows NT 4.0 domain for
ease of manageability. This is not required for stand-alone systems, but it is
recommended.
7. While the system is online, assign the LUNs to the NAS device one at a time
so that they can be identified easily in Device Manager. See the procedure in
the storage management section of the administration guide.
8. Using Logical Disk Manager, write signatures to the disks, mark them as
basic or dynamic, create corresponding partitions, extended partitions or
volumes, assign drive letters,
and format the drives. See the LDM online help
for full details on this procedure.
9. Create shares and assign share permissions.
10. This is an optional step. Enable protocols such as NCP and/or AppleTalk as
desired. See the administration guide for this procedure in detail.
11. This is a recommended step. Create shares corresponding to the protocols
mentioned in the previous steps. Grant access rights to the shares.
12. This is a recommended step. Activate the iLO License Key. The iLO
License Key is included in the country kit.
13. This is an optional step. Install NAS Data Copy for replication services
among NAS or server products. A thirty day trial license is included with
NAS operating system.
14. Read the remaining sections of the administration guide which detail the steps
and processes for utilizing the NAS device.
Clustered NAS e7000 v2
The following describes how to configure the NAS e7000 v2 as a clustered pair.
1. Request storage from the SAN administrator referencing the suggestions
made in this guide and the storage management section of the administration
guide. The LUNs will need to exist on the SAN prior to completing setup. A
mirrored quorum disk and at least two additional logical unit numbers (LUNs)
will be required to allow each node of the cluster to manage file system
resources.
2. Set up each NAS device in the cluster using either Chapter 2 or 3 from this
guide.
3. Identify the firmware, storage network topology (hub vs. switch), and storage
controller features in use on the SAN. Prior to connecting any fiber cables,
utilize the SAN Connection tool included in the HP Utilities Tab of the